By Dr. Alexander Paselk · First published in Thriving Across Cultures
Safety failures rarely announce themselves with alarms or injuries. They appear first in silent details—the missing documents, misplaced equipment, and the small hazards we overlook.
During a recent walkaround of various operational areas, I observed several seemingly "minor" but critical lapses:
- A missing SDS (Safety Data Sheet) folder near the mud tanks—neglected by the mud engineer.
- Obsolete, unmaintained equipment stored too close to operational mud pits—unaddressed by the derrickman.
- Gas cylinders improperly stored adjacent to the welding shop—overlooked by the welder.
- SCBA boxes (self-containing breathing aparatus) used for waste disposal because the garbage bin was full—ignored by housekeeping.
Individually, none of these conditions caused immediate harm. Collectively, however, they revealed something much more dangerous: A normalization of substandard conditions.
And, critically, they exposed a deeper misunderstanding across many worksites:
Safety is wrongly seen as external policing, rather than internal operational discipline.
This article explores why that misconception persists, the operational risks it creates, and how HSE leaders can reset ownership and accountability on the ground.
The Visible Gap Between Knowing and Doing
Every high-risk industry—oil and gas, mining, construction, manufacturing—relies on structured safety systems: work permits, risk assessments, inspections, toolbox talks, and certifications.
However, even the best-designed systems are only as effective as their daily execution.
The failures observed were not system failures—they were execution failures.
- Not because workers were incapable.
- Not because supervisors were unaware.
- But because daily attention to operational standards had slipped.
When workers believe "safety will catch it" or "HSE will fix it," a dangerous passivity sets in. Operational stewardship declines unless externally prompted—and that is not how safe work cultures are built.
The condition of the worksite is the responsibility of the crew and area supervisors—not the safety department.
The Misconception: Safety as Police Officers
At too many sites, the relationship between operations and HSE remains adversarial. Safety professionals are seen as compliance enforcers, clipboard carriers, or penalty issuers.
This stems from two main failures:
- Poor role clarity between operations and HSE.
- A reactive view of safety rather than a preventive culture.
In reality, safety professionals are not substitutes for supervision or operational discipline. We exist to verify that work is being conducted safely, not to carry out the work ourselves.
Our role is to:
- Confirm the proper execution of work permits and risk assessments.
- Verify equipment condition and certifications.
- Monitor training compliance and worker competencies.
- Ensure effective toolbox talks and hazard recognition.
- Manage visitor induction and access control.
We do not:
- Manage your waste.
- Store your cylinders.
- Repair your obsolete equipment.
These tasks are—and must remain—the domain of operational teams.
Why Area Ownership Matters More Than Safety Supervision
Clean, organized, hazard-free worksites are the product of operational discipline, not increased HSE patrols.
When crews and supervisors take ownership:
- Garbage is not allowed to overflow into emergency equipment storage.
- Expired gas cylinders are removed before they accumulate.
- Obsolete equipment is dealt with proactively.
Ownership is led by operations and supported by safety—not enforced externally.
If area stewardship is weak, more inspections will only document the erosion of standards—until an incident occurs.
Resetting Expectations: Safety and Operations Partnership
To move from a "police" model to a true partnership, both sides must reset expectations.
Supervisor Accountability:
- Area supervisors must own the daily condition of their zones: housekeeping, storage, waste management, and immediate corrections must be visibly led.
Worker Responsibility:
- Workers must understand that a clean, organized, hazard-controlled environment protects their own lives—and is not someone else's job.
Safety Team Focus:
- HSE teams must stay disciplined to their role: verifying controls, coaching where needed, and escalating when necessary—not fixing operational gaps.
Real-Time Corrective Actions:
- Workers and supervisors must address hazards immediately, not defer action for later "inspection rounds."
Joint Walkthroughs:
- Wherever possible, walkthroughs should include both HSE staff and operational leaders, reinforcing shared responsibility.
Practical Best Practices for Field Ownership
To strengthen operational ownership, implement these field practices:
- Daily Supervisor Walks: Supervisors conduct pre-HSE shift walkthroughs.
- 5-Minute Fix Rule: If a hazard can be fixed in five minutes, it must be corrected immediately.
- Weekly Area Reviews: HSE and operations jointly review areas with documented action tracking.
- Field-Led Toolbox Talks: Workers lead one toolbox talk per week to build peer accountability.
- Recognition Programs: Reward teams that demonstrate sustained operational stewardship—not merely those with "zero incidents."
Conclusion: Safety Is a Partnership, Not a Patrol
Good intentions alone do not sustain safe operations. Daily operational discipline does.
Safe workplaces are created by workers, supervisors, and line management—not by safety departments.
Safety’s role is to check, coach, verify, and reinforce—not to clean up after operational failures.
If we continue to view safety as policing, we will waste precious time managing symptoms rather than solving root causes.
Operational ownership builds safety. Safety partnerships build resilience. Patrols build neither.
How is your site ensuring visible operational ownership—without waiting for a safety patrol?
